Code: E12
Description: Paper misfeeding. Bypass misfeeding (Paper not reaching the registration sensor): The paper fed from the bypass tray does not reach the registration sensor.
Remedy: 1 Open the transfer cover. Is there any paper in front of the registration sensor? Yes Remove the paper. 2 No 2 Is the registration sensor working? (Perform the input check in the test mode: 13-[04. SENSOR TEST]) Yes 3 No 1. Check if the connector of the registration sensor is disconnected. 2. Check if the connector CN26 on the MAIN board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5. Replace the registration sensor. 6. Replace the MAIN board. 3 Is the bypass pickup solenoid working? (Perform the output check in the test mode: 04- 204) Is the bypass paper sensor working? (Perform the input check in the test mode: 13-[04. SENSOR TEST]) Yes 4 No 1. Check if the connector of the bypass pickup solenoid and bypass paper sensor are disconnected. 2. Check if the connector CN26 on the MAIN board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5. Replace the bypass pickup solenoid and bypass paper sensor. 6. Replace the MAIN board. 4 Check the bypass pickup roller. Replace it if it is worn out.