Code: E41
Description: Cover open jam. Front cover open jam: The front cover has opened during printing.
Remedy: 1 Is the front cover open? Yes Close the cover. 2 No 2 Is the front cover opening/ closing switch working? (Perform the input check in the test mode: 13-[04. SENSOR TEST]) Yes 3 No 1. Check if the connector of the front cover opening/ closing switch is disconnected. 2. Check if the connector CN3 on the MAIN board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5. Replace the front cover opening/closing switch. 6. Replace the MAIN board. 3 Is the voltage of 24V being supplied from the power supply unit? (Perform the input check in the test mode: 13-[04. SENSOR TEST]) Yes 4 No 1. Check if the connector for 24 V power supply is disconnected. 2. Check if the connector CN23 on the MAIN board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5. Replace the MAIN board. 4 Replace the MAIN board.