Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C452 — Toshiba e-Studio 2306

Code: C452

Description: Fuser unit related service call. In the READY state, temperature differential error between the center thermistor and a side thermistor
Causes: MAIN board
Remedy: 1. Check the thermistors 1. Check if the connectors are disconnected. 2. Check if the center and edge thermistors are in contact with the surface of the fuser roller properly? 3. Check if the center and edge thermistors are not deformed or dirty. 4. Check if the harnesses of the center and edge thermistors are open circuited. 2. Check the MAIN board 1. Check if the connectors CN10 are disconnected. 2. Check if the conductor pattern on the MAIN board is short circuited or open circuited. 3. Replace the MAIN board 3. Clear the status counter After repairing the matter which caused the error [C452], perform the following: 1. Turn ON the power while [0] and [8] are pressed simultaneously. 2. Key in "2002", then press [START]. 3. Change the current status counter value "62" to "0", then press [OK] (to cancel [C452]). 4. Turn the power OFF and then back ON. M

← Xem tất cả mã lỗi Toshiba e-Studio 2306

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie