Code: E440
Description: Feed cover open jam: The feed cover has opened during printing.
Causes: Feed cover opening/closing detection sensor MAIN board
Remedy: 1 Is the feed cover open? Yes Remove the paper if there is any, then close the cover. No 2 2 Is the feed cover opening/ closing detection sensor working? (Perform the input check in the test mode: 03-[A]/ [E]) Yes 3 No • Check if the connector of the feed cover opening/closing detection sensor is disconnected. • Check if the connector CN27 on the MAIN board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the MAIN board is short circuited or open circuited. • Replace the feed cover opening/closing detection sensor. 3 Replacing board • Replace the MAIN board.