Code: C4B0
Description: Fuser unit related service call. Fixer counter data error
Causes: MAIN board
Remedy: 1. Check the MAIN board 1. Check if the conductor pattern on the MAIN board is short circuited or open circuited. 2. Check if the Memory(IC11) is installed properly. 3. Replace the MAIN board 2. Clear the status counter After repairing the matter which caused the error [C4B0], perform the following: 1. Turn ON the power while [0] and [8] are pressed simultaneously. 2. Key in “2002”, then press [START]. 3. Rewrite the displayed counter with “0” and then press the [OK] button ([C4B0] clear). 4. Turn the power OFF and then back ON. Make sure that the equipment enters the normal ready state.