Code: E360
Description: PFP lower drawer transport jam (Paper not reaching the PFP upper drawer feed sensor): The paper does not reach the PFP upper drawer feed sensor after it has passed the PFP lower drawer feed sensor.
Causes: PFP upper drawer feed sensor PFP board MAIN board PFP transport clutch Feed roller Separation roller Pickup roller PFP transport roller
Remedy: 1 Open the PFP side cover. Is there any paper in front of the PFP upper drawer feed sensor? Yes Remove the paper. No 2 2 Is the PFP upper drawer feed sensor working? (Perform the input check in the test mode: 03- [FAX]OFF/[7]/[A]) Yes 3 No • Check if the connector of the PFP upper drawer feed sensor is disconnected. • Check if either of the connectors CN410 on the PFP board is disconnected. • Check if the connector CN26 on the MAIN board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor patterns on the PFP board and MAIN board are short circuited or open circuited. • Replace the PFP upper drawer feed sensor. • Replace the PFP board. • Replace the MAIN board. 3 Is the PFP feed clutch working? (Perform the output check in the test mode: 03-226) Yes 4 No • Check if the connector of the PFP transport clutch is disconnected. • Check if any of the connectors CN410 on the PFP board is disconnected. • Check if the connector CN26 on the MAIN board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor patterns on the PFP board and MAIN board are short circuited or open circuited. • Replace the PFP transport clutch. • Replace the PFP board. • Replace the MAIN board. 4 Feed roller Separation roller Pickup roller PFP transfer roller • Check the condition of the feed roller, separation roller and pickup roller of each paper source, and replace them if they are worn out. • Check the PFP transport roller. Replace it if it is worn out.