Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E961 — Toshiba e-Studio 230L

Code: E961

Description: Stop jam at the offset tray transport sensor: The trailing edge of the paper does not pass the offset tray transport sensor.
Remedy: Open the OCT cover. Is there any paper on the transport path? YES Remove the paper. NO Is the OCT feed sensor working? (Perform the input check in the test mode: 03-[FAX]ON/[3]/[H]) NO 1) Check if the connector of the OCT feed sensor is disconnected. 2) Check if either of the connectors CN260 or CN262 on the OCT board is disconnected. 3) Check if the connector CN306 on the LGC board is disconnected. 4) Check if the connector pins are disconnected and the harnesses are open circuited. 5) Check if the conductor patterns on the OCT board and LGC board are short circuited or open circuited. 6) Replace the OCT feed sensor. 7) Replace the OCT board. 8) Replace the LGC board. YES 1) Replace the OCT board. 2) Replace the LGC board.

← Xem tất cả mã lỗi Toshiba e-Studio 230L

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie