Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E9F0 — Toshiba e-Studio 232

Code: E9F0

Description: Punching jam: Punching is not performed properly. [MJ-1025 (When MJ-6005 is installed)]
Remedy: MJ-1025 Is there any paper remaining on the transport path in the finisher or equipment? YES Remove the paper. NO Is the connector J1006 on the punch controller PC board disconnected? Is the harness connecting the punch controller PC board and punch home position sensor (PI1P) open circuited? YES Connect the connector securely. Replace the harness. NO Is the punch home position sensor working properly? l NO 1) Connect the connector of the punch home position sensor securely. 2) Replace the punch home position sensor. YES Replace the punch controller PC board.

← Xem tất cả mã lỗi Toshiba e-Studio 232

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie