Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E200 — Toshiba e-Studio 2320c

Code: E200

Description: 1st drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st drawer feed sensor.
Causes: Registration sensor Lower transport clutch LGC board Feed roller Replace it if it is worn out. Separation roller Replace it if it is worn out. Pickup roller Replace it if it is worn out. Transport roller Replace it if it is worn out.
Remedy: Registration sensor • Sensor check (Perform the input check: 03-[ALL]OFF/[7]/[F]) • Connector check (CN348) • Harness check Lower transport clutches • Clutch check (Perform the output check: 03-229, 231) • Connector check (CN348) • Harness check LGC board • Board check • Connector check (CN348) • Harness check

← Xem tất cả mã lỗi Toshiba e-Studio 2320c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie