Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C45 — Toshiba e-Studio 243

Code: C45

Description: Fuser unit related service call. Thermistor abnormality during printing: Abnormality of the thermistor is detected during printing.
Causes: MAIN board Switching regulator
Remedy: Check the thermistors • Check if the connector is disconnected. • Check if the edge thermistor is in contact with the surface of the fuser roller properly. • Check if the harness of the edge thermistor is open circuited. Check the MAIN board • Check if the connectors CN17 are disconnected. • Check if the conductor pattern on the MAIN board is short circuited or open circuited. • Replace the MAIN board. Clear the status counter Change the current status counter value (08-400) “6” to “0”.

← Xem tất cả mã lỗi Toshiba e-Studio 243

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie