Code: E40
Description: Transfer cover open jam: The transfer cover has opened during printing.
Causes:
Remedy: Step Check Item Result Measure Next Step
1 Is the ADU cover open? Yes Remove paper if there is any, then close the cover. 2 No 2 Is the voltage of 24V being supplied from the power supply unit? (Perform the input check in the test mode: 03- [INTERRUPT]OFF/[8]/[6]) Yes 3 No 1. Check if the connector for 24 V power supply is disconnected. 2. Check if the connector CN23 on the MAIN board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5. Replace the MAIN board. 3 Replace the MAIN board.
1 Is the ADU cover open? Yes Remove paper if there is any, then close the cover. 2 No 2 Is the voltage of 24V being supplied from the power supply unit? (Perform the input check in the test mode: 03- [INTERRUPT]OFF/[8]/[6]) Yes 3 No 1. Check if the connector for 24 V power supply is disconnected. 2. Check if the connector CN23 on the MAIN board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5. Replace the MAIN board. 3 Replace the MAIN board.