Code: C45
Description: Thermistor abnormality during printing: Abnormality of thethermistor is detected during printing.
Remedy: Check Item: Check the thermistors • Check if the connector is disconnected. • Check if the edge thermistor is in contact with the surface of the fuser roller properly. • Check if the harness of the edge thermistor is open circuited. Check the MAIN board • Check if the connectors CN17 are disconnected. • Check if the conductor pattern on the MAIN board is short circuited or open circuited. • Replace the MAIN board. Clear the status counter Change the current status counter value (08-400) “6” to “0”.
Parts to be replaced: MAIN board Switching regulator
Parts to be replaced: MAIN board Switching regulator