Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E11 — Toshiba e-Studio 245

Code: E11

Description: Paper misfeeding. ADU misfeeding (Paper not reaching the registration sensor): The paper which has passed through ADU does not reach the registration sensor during duplex printing.
Remedy: 1 Open the transfer cover. Is there any paper in front of the registration sensor? Yes Remove the paper. 2 No 2 Is the registration sensor working? (Perform the input check in the test mode: 13-[04. SENSOR TEST]) Yes 3 No 1. Check if the connector of the registration sensor is disconnected. 2. Check if the connector CN26 on the MAIN board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open circuited. 4. Check if the conductor pattern on the MAIN board is short circuited or open circuited. 5. Replace the registration sensor. 6. Replace the MAIN board. 3 Check the rollers in the ADU. Replace them if they are worn out.

← Xem tất cả mã lỗi Toshiba e-Studio 245

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie