Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CB00 — Toshiba e-Studio 2500AC

Code: CB00

Description: Finisher not connected
Causes: Finisher control PC board LGC board
Remedy: Setting of the equipment • Check if the finisher is set as the specified finisher on the equipment (FS-08-4548). Finisher • Check if the harness connecting the equipment and the finisher controller PC board is disconnected or open circuited. • Check if the conductor pattern on the finisher controller PC board is open circuited or short circuited. • Update the finisher firmware. LGC board • Check if the harness connecting the FIN board and the LGC board on the equipment is disconnected or open circuited. • Connector check (CN346) • Check if the conductor pattern on the LGC board is open circuited or short circuited.

← Xem tất cả mã lỗi Toshiba e-Studio 2500AC

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie