Description: Stack transport motor abnormality * You receive a [CC30] error when the [EA70] error occurs three times in succession. MJ-1110. Stack transport motor abnormality: The stack transport motor is not rotating or the stack transport belt is not moving normally.
Causes: Stack transport motor (M8) Finisher control PC board (FIN)
Remedy: Check item Measures Stack transport belt Move the stack transport belt. Fix any mechanical problem. Stack transport motor (M8) Check if the connector (CN18) on the finisher control PC board is disconnected from the stack transport motor (M8) and the harnesses are open circuited. Correct if so.