Description: Other paper jam Paper not reaching the transport sensor after a registration jam
Causes: Rollers Developer unit CFD board LGC board Registration clutch Registration roller Replace it if it is worn out. Registration sensor Registration pass sensor
Remedy: Paper stop jam at Registration roller Drawer Check if any damage is at the leading edge. Check if paper is folded at the leading edge. Drive unit, Rollers • Drive unit check • Gear check • Roller check Developer unit Replace the Developer unit. CFD board • Board check • Connector check (CN404) • Harness check LGC board • Board check • Connector check (CN367, CN351) • Harness check Registration sensor • Sensor check (Perform the input check: FS-03- [ALL]OFF/[9]/[A]) • Connector check (CN404, J791) • Harness check Registration pass sensor • Sensor check (Perform the input check: FS-03- [ALL]OFF/[9]/[F]) • Connector check (CN351) • Harness check