Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi F071 — Toshiba e-Studio 2500AC

Code: F071

Description: Communication initialization error between System-CPU and Engine-CPU
Causes: LGC board SYS board LED printer head Harness
Remedy: 1 LED printer head, harness 1-1. Disconnect all the harnesses (flat cable and power supply) of the LED printer heads, and then turn the power ON. Check if the error changes to another service call (CE80 etc.). (CN329, CN330, CN331, CN332, CN356, CN357, CN358, CN359) 1-2. If the error does not change to another service call such as CE80 in step 1-1, go to step 2. If the error changes to another service call, follow the steps below. 1-3. Connect the harnesses of the LED printer head to the LGC board single color at a time, and then turn the power ON to identify the LED printer head in error. Check if F071 occurs. Place the parts causing the error. Check the connectors and harnesses of the color in error. <Harness (flat cable) - LGC board> Y color: CN357 M color: CN358 C color: CN331 K color: CN329 <Harness (power supply) - LGC board> Y color: CN359 M color: CN358 C color: CN332 K color: CN330 <Harness (flat cable) - LED printer head> Y color: CN788 M color: CN790 C color: CN792 K color: CN794 <Harness (power supply) - LED printer head> Y color: CN787 M color: CN789 C color: CN791 K color: CN793 2 Check firmware version • Check the version of the system firmware on the SYS board. • Check the version of the engine firmware on the LGC board. 3 Board check • Check if the connector CN131, CN132 on the SYS board and the connector CN371, CN370 on the LGC board are completely inserted, and the harness is disconnected or open circuited. • Check if the connector pin between the SYS board (connector CN131, CN132) and the LGC board (connector CN371, CN370) is disconnected. • Check if the connectors CN329, CN330, CN331, CN332, CN356, CN357, CN358 and CN359 of the LED printer head are completely inserted, and the harness is disconnected or open circuited. • Check if the conductor patterns on the LGC board and SYS board are short circuited or open circuited. 4 Harness • Connector check • Harness check

← Xem tất cả mã lỗi Toshiba e-Studio 2500AC

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie