Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E120 — Toshiba e-Studio 2505

Code: E120

Description: Bypass misfeeding. Jam not reaching the registration sensor
Causes: MAIN board Bypass feed clutch Bypass paper sensor Bypass feed roller Separation pad
Remedy: 1 Open the right cover. Is there any paper on the transport path? Yes Remove the paper. No 2 2 Is the bypass feed clutch working? (Perform the output check in the test mode: 03-204) Is the bypass paper sensor working? (Perform the input check in the test mode: 03-[4]/[F]) Yes 3 No • Check if the connector of the bypass feed clutch and bypass paper sensor are disconnected. • Check if the connector CN22 on the MAIN board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the MAIN board is short circuited or open circuited. • Replace the bypass feed clutch and bypass paper sensor. • Replace the MAIN board. 3 Bypass feed roller Bypass separation pad • Check the bypass feed roller and bypass separation pad. Replace them if they are worn out.

← Xem tất cả mã lỗi Toshiba e-Studio 2505

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie