Description: Carriage home position sensor not going ON within a specified time
Causes: Carriage home position sensor Carriage home position sensor harness SYS board Scan motor Scan motor harness
Remedy: 1 Carriage locking Check if the carriage locking screw for packaging is attached. 2 Carriage hole position sensor 1. Check if the harness is properly connected to the sensor. 2. Check if the harness is caught or open circuited. 3 SYS board 1. Check if the harness (CN121, J002) of the carriage home position sensor is connected properly. 2. Check if the mounted parts on the SYS board are damaged or abnormal. 3. Check if 24 V (CM105) on the SYS board is short circuited. 4. Check if 24 V is supplied to the SYS board (CN105). 4 Scan motor 1. Check if the belt tension is loosened (if the motor screw is loosened). 2. Check if the carriage wire and the timing belt come off. 3. Check if the connector (CN124) is connected to the motor properly. 4. Check if the harness of the motor is caught or open circuited.