Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C4E0, C4E1 — Toshiba e-Studio 2505AC

Code: C4E0, C4E1

Description: [C4E0] Fuser pressure roller release abnormality [C4E1] Fuser pressure roller contact/semi-contact abnormality. The releasing behavior of the pressure roller cannot be detected/the abnormality of the sensor of the fuser unit. (C4E0) The contacting/semi-contacting behavior of the pressure roller cannot be detected/the abnormality of the sensor of the fuser unit. (C4E1
Causes: Pressure roller contact/release detection sensor Pressure roller contact/release motor LGC board
Remedy: Pressure roller contact/release detection sensor (S29) • Sensor check (Perform the input check: FS-03-[F3]ON/[2]/[H]) • Connector check (CN306, J605) • Harness check Pressure roller contact/release motor (M13) ¡E Motor check (Perform the output check: FS-03-272) ¡E Connector check (CN305, J602) ¡E Harness check Fuser unit ¡E Drawer connector check ¡E Thermostat check ¡E Unit check Check if the adjustment value for the tilting of the fuser unit is aligned to the uppermost line of the scale. Refer to P. 8-371 "8.5.36 Image Skewing on Paper Trailing Edge". LGC board E Connector check (CN305, CN306) ¡E Board check

← Xem tất cả mã lỗi Toshiba e-Studio 2505AC

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie