Description: Buffer tray guide motor abnormality * A [CB11] error occurs if the [ED16] error occurs three times in succession or the [ED16] error occurs during the initialization. Buffer tray guide motor abnormality: The buffer tray guide motor is not rotating or the buffer tray guide is not moving normally. MJ-1109/1110
Causes: Buffer tray guide motor (M2) Finisher control PC board (FIN)
Remedy: Buffer tray guide Raise the buffer roller and open/close the buffer tray guide. Fix any mechanical problem. Buffer tray guide motor (M2) Check if the connector (CN10) on the finisher control PC board is disconnected from the buffer tray guide motor (M2) and the harnesses are open circuited. Correct if so.