Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E013 — Toshiba e-Studio 2505AC

Code: E013

Description: Paper not reaching the transport sensor after a registration jam
Causes: Registration pass sensor Rollers Developer unit
Remedy: Paper stop jam at Registration roller Registration pass sensor • Sensor check (Perform the input check: FS-03- [ALL]OFF/[9]/[F]) • Connector check (CN309, J620, J621) • Harness check Drawer Check if any damage is at the leading edge. Check if paper is folded at the leading edge. Drive unit, Rollers • Drive unit check • Gear check • Roller check Developer unit Replace the Developer unit. Aligning amount If the aligning amount is too small, a skew, an image dislocation in the feeding direction, E013 (a paper jam occurring between the registration pass sensor and the paper clinging detection sensor) may happen. If the aligning amount is too large, on the other hand, an abnormal noise (paper-folding noise) or actual paper folding may occur. Confirm that the value of the aligning amount is appropriate. Refer to ƒt P. 6-8 "6.1.6 Paper alignment at the registration roller".

← Xem tất cả mã lỗi Toshiba e-Studio 2505AC

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie