Description: [MJ-1109/1110] Buffer tray home position error
Causes: Buffer tray home position sensor (S5) Assist arm motor (M10) Buffer tray guide motor (M2) Finisher controller PC board (FIN)
Remedy: Buffer tray guide Open and close the buffer tray guide. Fix any mechanical problem. Buffer tray home position sensor (S5) Check if there is a disconnection of the connector, incorrect installation or breakage of the buffer tray home position sensor (S5). If there is, reinstall the sensor correctly or replace it. Check if the connector (CN11) on the finisher controller PC board is disconnected from the buffer tray home position sensor (S5) and the harnesses are open circuited. Correct if so. Assist arm motor (M10) Check if the connector (CN10) on the finisher controller PC board is disconnected from the assist arm motor (M10) and the harnesses are open circuited. Correct if so. Buffer tray guide motor (M2) Check if the connector (CN10) on the finisher controller PC board is disconnected from the buffer tray guide motor (M2) and the harnesses are open circuited. Correct if so.