Description: [MJ-1110] Stapling error (rear) in the saddle stitch unit
Causes: Rear saddle stapler drive unit Saddle control PC board (SDL)
Remedy: Paper • Check if there is any paper in the hole punch unit, finisher or the on the transport path of the equipment. Remove it if there is. • Use paper accepted in the specifications. Staple cartridge (rear side) • Is the jam released by taking off the rear staple cartridge from the Finisher and removing the staple sheet slid from the staple case? Rear saddle stapler drive unit • Unit check • Connector check • Harness check Saddle control PC board (SDL) • Connector check (CN1) • Board check