Code: E420
Description: PFP side cover open jam: The PFP side cover has opened during printing.
Causes: PFP side cover opening/closing switch PFP board MAIN board
Remedy: 1 Is the PFP side cover open? Yes Remove the paper if there is any, then close the cover. No 2 2 Is the PFP side cover opening/closing switch working? (Perform the input check in the test mode: 03-[1]/ [D]) Yes 3 No • Check if the connector of the PFP side cover opening/closing switch is disconnected. • Check if either of the connectors CN410 on the PFP board is disconnected. • Check if the connector CN26 on the MAIN board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor patterns on the PFP board and MAIN board are short circuited or open circuited. • Replace the PFP side cover opening/ closing switch. • Replace the PFP board. • Replace the MAIN board. 3 Replacing board • Replace the PFP board. • Replace the MAIN board.