Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EB50 — Toshiba e-Studio 2508A

Code: EB50

Description: Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper.
Causes: Registration sensor LGC board Rollers on the transport path
Remedy: 1 ADU Open the ADU and remove paper if there is any on the transport path. 2 2 Is the registration sensor working? (Perform the input check: FS-03- [ALL]OFF/[9]/[A]) Yes Check the rollers. Replace them if they are worn out 3 No Replace the registration sensor. 3 3 LGC board 1. Check if the connector CN318 on the LGC board is disconnected. 2. Check if the connector pins are disconnected or the harnesses are open circuited. (J659, J660) 3. Check if the conductor patterns on the LGC board are short circuited or open circuited

← Xem tất cả mã lỗi Toshiba e-Studio 2508A

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie