Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E010 — Toshiba e-Studio 2540c

Code: E010

Description: Jam not reaching the exit sensor: The paper which has passed through the fuser unit does not reach the exit sensor.
Causes: Separation plate of the fuser unit Separation finger of the fuser unit Transfer belt Transfer belt unit Exit sensor LGC board
Remedy: Paper separation failure at separation plate in the Fuser Unit Fuser unit • Check the gap between the separation plate and the fuser belt. (Refer to "6.7.4 Gap adjustment for separation plate".) • Paper tranceport check Drawer Check that paper is not skewed in the side guides of the drawer. Leading edge margin Adjust the margin with 05-4402 (Leading edge position adjustment) to "Color: 5.5 mm". Widen the margin if needed. (Specification Black: 4.2 mm / Color: 5 mm) • Use A3/LD paper • It is easy to check skew with a copy of a solid image (about 10 mm on its leading edge). Refer to "6.1.1 Image Related Adjustment". Paper jamming at separation finger in the Fuser Unit. Fuser unit Clean the separation finger. Check if the fingers or springs of the separation finger are securely attached. Replace the separation finger. The leading edge of paper has no scratches and the paper stops before being fused. Fuser unit Check that the pressure release screw of the pressure roller is securely tightened and pressure is properly applied. Transfer belt Replace the transfer belt. Replace the transfer belt unit. Paper folded in one side and fused during duplex printing Check if toner adheres to the fuser entry guide. Clean it if needed All Exit sensor • Sensor check (Perform the input check: 03- [FAX]ON/[1]/[B]) • Connector check • Harness check LGC board • Board check • Connector check (CN333) • Harness check

← Xem tất cả mã lỗi Toshiba e-Studio 2540c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie