Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EAE0 — Toshiba e-Studio 2540c

Code: EAE0

Description: Receiving time time-out jam: The printing has been interrupted because of the communication error between the equipment and finisher when the paper is transported from the equipment to the finisher.
Causes: Finisher controller PC board
Remedy: Finisher • Is the finisher working? • Check if the voltage (24V) is being supplied to the finisher. • Check if the harness connecting the I/F connector of the finisher side and finisher controller PC board is open circuited. LGC board IPC board Finisher controller PC board • Check the connection of the LGC board and IPC board. • Check if the harness connecting the IPC board and finisher I/F connector of the equipment side is open circuited.

← Xem tất cả mã lỗi Toshiba e-Studio 2540c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie