Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CB80 — Toshiba e-Studio 255

Code: CB80

Description: Backup RAM data abnormality: 1. Abnormality of checksum value on finisher controller board is detected when the power is turned on. [MJ-1025/MJ-1024/MJ-1031] 2. Abnormality of checksum value on punch controller board is detected when the power is turned on. [MJ-1025 (when MJ-6005 is installed), MJ-1024 (when MJ-6004 is installed)]
Remedy: MJ-1024 Is the problem solved by turning the power of the equipment OFF and ON? YES End. NO 1. Replace the finisher controller PC board. 2. Replace the punch controller PC board.
MJ-1024 Is the problem solved by turning the power of the equipment OFF and ON? YES.. End. NO 1. Replace the finisher controller PC board. 2. Replace the punch controller PC board.
MJ-1031 Is the problem solved by turning the power of the equipment OFF and ON? YES.. End. NO Replace the finisher controller PC board
MJ-1101 Is the error recovered when the power of the equipment is turned OFF and then back ON? ..YES End. NO Replace the finisher control PC board.

← Xem tất cả mã lỗi Toshiba e-Studio 255

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie