Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E721 — Toshiba e-Studio 255

Code: E721

Description: Jam not reaching the read sensor: The original does not reach the read sensor after it has passed the registration sensor (when scanning obverse side) or the reverse sensor (when scanning reverse side).
Remedy: 1. Clean the registration roller and the read roller if they are stained. 2. Is the read sensor working? (Perform the input check: 03-[FAX]ON/[7]/[G]) * If it is working properly, proceed to 6. If not, check 3 to 5 below. 3. Check if the connector CN76 on the RADF board is disconnected from the read sensor or the harnesses are open circuited. Correct if any. 4. Replace the read sensor. 5. Replace the RADF board. 6. Replace the registration roller and the read roller if they are worn out.

← Xem tất cả mã lỗi Toshiba e-Studio 255

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie