Code: EA20
Description: 1st transport motor (M8) fault/ 2nd transport motor (M4) fault [MJ-1036] Paper transport jam (transport sensor): Paper being transported on the Finisher transport path is stopped at the entrance sensor at 27.56 inches or longer. [MJ-1107/1108]
Causes: Transport sensor Finisher controller PC board
MJ-1108 Entrance sensor (S1) Finisher control PC board (FIN)
MJ-1108 Entrance sensor (S1) Finisher control PC board (FIN)
Remedy: MJ-1036 1st transport motor (M8) abnormality Check if the electrical continuity of the coil is normal. If electricity is not conducted, replace the motor. Faulty cables and connectors Check if the electrical continuity between the connector terminals is normal. If electricity is not conducted, replace the connector. (Finisher control PC board (FIN): CN22) 2nd transport motor (M4) abnormality Check if the electrical continuity of the coil is normal. If electricity is not conducted, replace the motor. Faulty cables and connectors Check if the electrical continuity between the connector terminals is normal. If electricity is not conducted, replace the connector. (Finisher control PC board (FIN): CN14) Finisher control PC board (FIN) abnormality If the error still occurs after replacing the motor and the connector, exchange the finisher control PC board (FIN).
MJ-1107 All Transport sensor • Sensor check • Connector check (S2) • Harness check Finisher controller PC board Board check(CN22)
MJ-1108 All Finisher Check if there is any paper in the finisher or on the transport path of the equipment and remove it if there is. Entrance sensor (S1) • Sensor check • Connector check • Harness check Finisher control PC board (FIN) • Board check • Connector check (CN26) • Harness check
MJ-1107 All Transport sensor • Sensor check • Connector check (S2) • Harness check Finisher controller PC board Board check(CN22)
MJ-1108 All Finisher Check if there is any paper in the finisher or on the transport path of the equipment and remove it if there is. Entrance sensor (S1) • Sensor check • Connector check • Harness check Finisher control PC board (FIN) • Board check • Connector check (CN26) • Harness check