Description: Stop jam at the read sensor: The trailing edge of the original does not pass the read sensor after its leading edge has reached this sensor.
Causes: Read sensor RADF board Read roller
Remedy: Read roller Clean the read roller if it is stained. Read sensor • Sensor check (Perform the input check: 03-[FAX] ON[7]/[G]) • Connector check (CN75, J94) • Harness check Original intermediate transport sensor • Sensor check (Perform the input check: 03-[FAX] ON[7]/[F]) • Connector check (CN75, J94) • Harness check RADF board • Board check • Connector check (CN75) • Harness check