Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E000 — Canon i-SENSYS LBP3100

Code: E000

Description: Error in startup
Causes: - The detected temperature of the thermistor does not reach 35 deg C within approx. 1.5 sec of the heater being turned on. - The detected temperature of the thermistor is 100 deg C or lower in standby mode.
Remedy: - Check connectors on the fixing film unit. - Replace the fixing film unit. - Replace the engine controller PCB.

← Xem tất cả mã lỗi Canon i-SENSYS LBP3100

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie