Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EA60 — Toshiba e-Studio 257

Code: EA60

Description: Early arrival jam: A paper jam occurs because paper from the equipment arrives at the Finisher too early. [MJ-1032/MJ-1033]
Causes: Entrance sensor Finisher controller PC board
Remedy: Finisher • Check if there is any paper in the finisher or on the transport path of the equipment or on the finishing tray. Remove it if there is. • Check if there is any disconnection, incorrect installation or breakage on the entrance sensor (S1). Correct if any. • Check if the connector CN7 on the finisher controller PC board is disconnected from the entrance sensor (S1) and the harnesses are disconnected or open circuited. Correct if any.

← Xem tất cả mã lỗi Toshiba e-Studio 257

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie