Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CB01 — Toshiba e-Studio 257S

Code: CB01

Description: Finisher communication error
Causes: Converter board Finisher control PC board
Remedy: Setting of the equipment • Check if the MJ-1101, MJ-1106, MJ-1032 or MJ-1033 is set as the specified finisher on the equipment (08-4548). Finisher • Check if the harness connecting the equipment and the finisher controller PC board is disconnected or open circuited. • Check if the conductor pattern on the finisher controller PC board is open circuited or short circuited. • Update the finisher firmware. Converter • Check if the connector connecting the converter board and the LGC board on the equipment is disconnected or open circuited. • Check if the conductor pattern on the converter PC board is open circuited or short circuited. • Update the converter firmware.

← Xem tất cả mã lỗi Toshiba e-Studio 257S

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie