Description: Door open jam: The delivery cover or inlet cover has opened during printing. [MJ-1106]
Causes: Sensor Saddle stitcher controller PC board
Remedy: Finisher • Check if there is any paper in the finisher, saddle stitcher or on the transport path of the equipment. Remove it if there is. • Check if the saddle stitcher door is closed. • Check if the connectors J10 and J11 on the saddle stitcher controller PC board are disconnected from any of the cover opening switches (the delivery cover sensor [P13] and the inlet cover sensor [P19]) or the harnesses are open circuited. Correct if any. • Check if the cover opening switches noted above are working properly.