Code: C18
Description: LCF tray-up motor is abnormal (paper can be fed from the cassettes other than the LCF cassette)
Remedy: Does the tray move? (Perform the output check in the test mode: 03-271) NO 1. Check if the connector of the LCF tray-up motor is disconnected. 2 Check if any of the connectors CN100, CN101 and CN103 on the LCF board is disconnected. 3. Check if the connector J312 on the LGC board is disconnected. 4. Check if the connector pins are disconnected and the harnesses are open-circuited. 5. Check if the conductor patterns on the LCF board and LGC board are short- or open-circuited. 6. Replace the LCF board. 7. Replace the LGC board. YES Are the LCF tray bottom sensor and LCF tray-up sensor working? (Perform the input check in the test mode: 03-[FAX]OFF/[5]/[F], /[3]/[A] NO 1. Check if the connectors of the sensors are disconnected. 2. Check if any of the connectors CN100, CN104 and CN105 on the LCF board is disconnected. 3. Check if the connector J312 on the LGC board is disconnected. 4. Check if the slit reaches the sensors. 5. Check if the connector pins are disconnected and the harnesses are open-circuited. 6. Check if the conductor patterns on the LCF board and LGC board arer short- or open-circuited. 7. Replace the LCF board. 8. Replace the LGC board. YES 1. Check if the conductor pattern on the LGC board is short- or open-circuited. 2. Replace the LGC board.