Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CB3 — Toshiba e-Studio 28

Code: CB3

Description: Tray lift motor is abnormal
Remedy: MJ-1012/1013 (Finisher section) [Procedure 1] Is the tray home position sensor (PI8) working normally? NO Replace the sensor. YES Is the tray elevation mechanism normal? NO Fix the mechanism. YES Is 24V DC supplied to the tray lift motor (M5) from the finisher controller PC board when the tray is being driven? NO Replace the finisher controller PC board. YES Is the wiring between the finisher controller PC board and the tray lift motor (M5) correct? YES Correct the wiring. NO Replace the tray lift motor (M5). [Procedure 2] Does the tray reach the tray upper limit detecting switch (MS5)? NO Lower the position of the tray. YES Is the tray upper limit detecting switch (MS5) working normally? NO Replace the switch. YES Is the wiring between the finisher controller PC board and the tray upper limit detecting switch correct? YES Correct the wiring. NO Replace the finisher controller PC board. [Procedure 3] Does the tray move up/down? NO Is the power supplied to the motor from the finisher controller PC board when the tray is moving? NO Replace the finisher controller PC board. YES Is there any problem with the tray elevation mechanism? YES Replace the tray lift motor (M5). NO Fix the tray elevation mechanism. YES Are the tray lift motor clock sensor-1/-2 (PI9/PI19) working normally? NO Replace the sensors. YES Replace the finisher controller PC board.

← Xem tất cả mã lỗi Toshiba e-Studio 28

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie