Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E13 — Toshiba e-Studio 28

Code: E13

Description: Upper cassette misfeeding (paper not reaching the upper feed sensor)
Remedy: Open the jam access cover. Is there any paper in front of the upper feed sensor? YES Remove the paper. NO Is the upper feed sensor working? (Perform the input check in the test mode: 03-[FAX]OFF/[6]/[E]) NO 1. Check if the connector of the upper feed sensor is disconnected. 2. Check if the connector J313 on the LGC board is disconencted. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the upper feed sensor. 6. Replace the LGC board. YES Is the upper cassette feed clutch working? (Perform the output check in the test mode: 03-201) NO 1. Check if the connector of the upper cassette feed clutch is disconnected. 2. Check if the connector J310 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are opencircuited. 4. Check if the conductor pattern on the LGC board is short- or open-circuited. 5. Replace the upper cassette feed clutch. 6. Replace the LGC board. YES Check the upper cassette feed roller and separation roller. Replace them if they are worn out.

← Xem tất cả mã lỗi Toshiba e-Studio 28

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie