Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CB10 — Toshiba e-Studio 280

Code: CB10

Description: Transport motor abnormality: The transport motor or stack transport roller is not rotating normally. [MJ-1025]
Remedy: MJ-1025 Is the stack feed roller (upper) home position sensor (PI12) working properly? NO Replace the sensor. YES Is the wiring between the finisher controller PC board and feed motor (M1) correct? NO Correct the wiring. YES Try turning the stack feed roller (upper) shaft by hand. Does the stack feed roller (upper) move up/down normally? NO Fix the mechanism. YES Try replacing the feed motor (M1). Is the problem corrected? YES End. NO Replace the finisher controller PC board.

← Xem tất cả mã lỗi Toshiba e-Studio 280

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie