Description: Stop jam at the read sensor: The trailing edge of the original does not pass the read sensor after its leading edge has reached this sensor.
Remedy: Is the read roller stained? YES Clean the roller. NO Is the read sensor working? (Perform the input check: 03-[FAX]ON/[7]/[G]) NO 1) Check if the connector of the read sensor is disconnected. 2) Check if the connector CN6 on the RADF board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the RADF board is short circuited or open circuited. 5) Replace the read sensor. 6) Replace the RADF board. YES Replace the RADF board.