Code: E961
Description: Stop jam at the offset tray transport sensor: The trailing edge of the paper does not pass the offset tray transport sensor.
Remedy: Open the OCT cover. Is there any paper on the transport path? YES Remove the paper. NO Is the OCT feed sensor working? (Perform the input check in the test mode: 03-[FAX]ON/[3]/[H]) NO 1) Check if the connector of the OCT feed sensor is disconnected. 2) Check if either of the connectors CN260 or CN262 on the OCT board is disconnected. 3) Check if the connector CN306 on the LGC board is disconnected. 4) Check if the connector pins are disconnected and the harnesses are open circuited. 5) Check if the conductor patterns on the OCT board and LGC board are short circuited or open circuited. 6) Replace the OCT feed sensor. 7) Replace the OCT board. 8) Replace the LGC board. YES 1) Replace the OCT board. 2) Replace the LGC board.