Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi EB50 — Toshiba e-Studio 280

Code: EB50

Description: Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper.
Remedy: In case the paper is fed from the upper drawer, bypass unit or ADU: Open the transfer cover. Is there any paper in front of the registration sensor? YES Remove the paper. NO When the paper is fed from the upper drawer: Is the 1st transport sensor working? (Perform the input check: 03-[FAX]OFF/[6]/[E]) NO 1) Check if the connector of the 1st transport sensor is disconnected. 2) Check if the connector CN305 on the LGC board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the LGC board is short circuited or open circuited. 5) Replace the 1st transport sensor. 6) Replace the LGC board. YES When the paper is fed from the bypass feed unit: Is the bypass paper sensor working? (Perform the input check: 03-[FAX]ON/[1]/[D]) NO 1) Check if the connector of the bypass paper sensor is disconnected. 2) Check if the connector CN304 on the LGC board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the LGC board is short circuited or open circuited. 5) Replace the bypass paper sensor. 6) Replace the LGC board. YES When the paper is fed from the ADU: Is the ADU exit sensor working? (Perform the input check: 03-[FAX]OFF/[1]/[G]) NO 1) Check if the connector of the ADU exit sensor is disconnected. 2) Check if either of the connectors CN562 or CN213 on the ADU board is disconnected. 3) Check if the connector CN304 on the LGC board is disconnected. 4) Check if the connector pins are disconnected or the harnesses are open circuited. 5) Check if the conductor patterns on the ADU board and LGC board are short circuited or open circuited. 6) Replace the ADU exit sensor. 7) Replace the ADU board. 8) Replace the LGC board. YES Is the registration sensor working? (Perform the input check in the test mode: 03-[FAX]ON/[2]/[A]) NO 1) Check if the connector of the registration sensor is disconnected. 2) Check if the connector CN305 on the LGC board is disconnected. 3) Check if the connector pins are disconnected and the harnesses are open circuited. 4) Check if the conductor pattern on the LGC board is short circuited or open circuited. 5) Replace the registration sensor. 6) Replace the LGC board. YES Check the rollers. Replace them if they are worn out.
In case the paper is fed from the lower drawer, PFP or LCF: Open the transfer cover. Is there any paper in front of the 1st transport sensor? YES Remove the paper. NO Are the 1st/2nd transport sensor working? (Perform the input check in the test mode: 03-[FAX]OFF/[6]/[E], /[7]/[E]) NO 1) Check if the connector of the 1st/2nd transport sensor is disconnected. 2) Check if the connector CN305/CN304 on the LGC board is disconnected. 3) Check if the connector pins are disconnected and the harnesses are open circuited. 4) Check if the conductor pattern on the LGC board is short circuited or open circuited. 5) Replace the 1st/2nd transport sensor. 6) Replace the LGC board. YES Check the rollers. Replace them if they are worn out.

← Xem tất cả mã lỗi Toshiba e-Studio 280

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie