Description: Jam not reaching the original registration sensor: The original fed from the original feeding tray does not reach the original registration sensor
Remedy: Are the pickup roller, feed roller and separation roller stained or worn out? → YES → Clean the rollers or replace them. NO Is the original excessively curled or folded? → YES → Flatten and set it again. NO Is the original registration sensor working? (Perform the input check: 03-[FAX]ON/[7]/[H]) ↓→ NO → 1) Check if the connector of the original registration sensor is disconnected. 2) Check if the connector CN74 on the RADF board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the RADF board is short circuited or open circuited. 5) Replace the original registration sensor. 6) Replace the RADF board. YES Replace the RADF board.