Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E721 — Toshiba e-Studio 281c

Code: E721

Description: Jam not reaching the read sensor: The original does not reach the read sensor after it has passed the registration sensor (when scanning obverse side) or the reverse sensor (when scanning reverse side).
Remedy: Are the registration roller and read roller stained? → YES → Clean the rollers. NO Is the read sensor working? (Perform the input check: 03-[FAX]ON/[7]/[G]) ↓→ NO → 1) Check if the connector of the read sensor are disconnected. 2) Check if the connector CN75 on the RADF board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the RADF board is short circuited or open circuited. 5) Replace the read sensor. 6) Replace the RADF board. YES Replace the RADF board.

← Xem tất cả mã lỗi Toshiba e-Studio 281c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie