Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E724 — Toshiba e-Studio 281c

Code: E724

Description: Stop jam at the original registration sensor: The trailing edge of the original does not pass the original registration sensor after its leading edge has reached this sensor.
Remedy: Is the registration roller stained? → YES → Clean the roller. NO Is the registration sensor working? (Perform the input check: 03-[FAX]ON/[7]/[H]) ↓→ NO → 1) Check if the connector of the registration sensor is disconnected. 2) Check if the connector CN74 on the RADF board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the RADF board is short circuited or open circuited. 5) Replace the registration sensor. 6) Replace the RADF board. YES Replace the RADF board

← Xem tất cả mã lỗi Toshiba e-Studio 281c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie