Description: Stapling jam: Stapling is not performed properly. [MJ-1024]
Remedy: MJ-1024 Is there any paper remaining on the transport path or the stapling tray in the finisher, saddle stitcher section or equipment? → YES → Remove the paper. NO Is the jam cleared by taking off the staple cartridge from the finisher and removing the staples stuck in the stapling unit? → YES → End. NO Is the connector J8 on the saddle stitcher controller PC board disconnected? Is the harness connecting the saddle stitcher controller PC board and stitcher home position switch (rear: SW5, front: SW7 open circuited? → YES → Connect the connector securely. Replace the harness. NO Are the stitcher home position switches working properly? ↓→ NO → 1) Connect the connectors of the stitcher home position switches securely. 2) Replace the stitcher home position switches. YES Replace the saddle stitcher controller PC board.