Code: CB30
Description: Tray lift motor abnormality: The tray lift motor is not rotating normally or the delivery tray is not moving normally. [MJ-1025]
Remedy: MJ-1025 [Procedure 1] Is the paper surface sensor (PI9) working properly? NO Replace the sensor. YES Is the tray up/down mechanism working properly? NO Fix the mechanism. YES Is 24 VDC supplied from the finisher controller PC board to the shift motor as soon as the tray is driven? NO Replace the finisher controller PC board. YES Is the wiring between the finisher controller PC board and shift motor (M6) correct? YES Replace the shift motor. NO Correct the wiring. [Procedure 2] Is the tray as far as the shift upper limit sensor? YES Lower the position of the tray. NO Is the shift upper limit sensor (PI15) working properly? NO Replace the sensor. YES Is the wiring between the finisher controller PC board and shift upper limit sensor (PI15) correct? YES Replace the finisher controller PC board. NO Correct the wiring. [Procedure 3] Does the tray go up? YES NO Is 24 VDC supplied from the finisher controller PCB to the shift motor as soon as the tray is driven? NO Replace the finisher controller PC board. YES Is there any problem with the tray up/down mechanism? YES Fix the lift mechanism. NO Replace the shift motor. Is the shift motor clock sensor (PI7) working properly? YES Replace the finisher controller PC boar NO Replace the sensor.