Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E726 — Toshiba e-Studio 282

Code: E726

Description: Transport/exit signal reception jam: RADF receives the transport/exit reception signal from the equipment when no original is at the exposure waiting position.
Remedy: (1) If the original remains in the RADF, remove it. (2) If any paper remains in the equipment, remove it. (3) Turn the power OFF and then back ON. If the jam still occurs, lead the following procedure. (4) Check the connection between the RADF board and SLG board, and the connection between the RADF board and switching power supply. • Are the connection of the connectors and joint connectors normal? • Are the connector pins disconnected or are the harnesses open circuited? (5) Check if the 24V and 5V outputs of the switching power supply are normal. (6) Check if the conductor pattern on the RADF board is short circuited or open circuited. (7) Replace the RADF board. (8) Check if the conductor pattern on the SLG board is short circuited or open circuited. (9) Replace the SLG board.

← Xem tất cả mã lỗi Toshiba e-Studio 282

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie