Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E910 — Toshiba e-Studio 2820c

Code: E910

Description: Jam at the bridge unit transport sensor 1: The paper does not reach the bridge unit transport sensor 1 after it has passed the exit sensor.
Causes: Bridge unit transport sensor-1 (entrance sensor) LGC board Bridge unit gate solenoid
Remedy: Paper separation failure at separation plate in the fuser unit Fuser unit • Check the gap between the separation plate and the fuser belt. (Refer to "6.7.4 Gap adjustment for separation plate".) • Paper tranceport check Drawer Check that paper is not skewed in the side guides of the drawer. Leading edge margin Adjust the margin with 05-4402 (Leading edge position adjustment) to "Color: 5.5 mm". Widen the margin if needed. (Specification Black: 4.2 mm / Color: 5 mm) • Use A3/LD paper • It is easy to check skew with a copy of a solid image (about 10 mm on its leading edge). Refer to "6.1.1 Image Related Adjustment". There are scratches on the leading paper edge Replace it if needed.Check if the guide is not deformed. Replace it if needed. All Bridge unit exit Check that Mylar on the bridge unit exit is not deformed. Replace it if needed. (E920) Finisher Check if paper jamming occurs in the finisher. Bridge unit transport sensor-1 (entrance sensor) • Sensor check (Perform the input check: 03- [FAX] ON[5]/[F]) • Connector check (CN334, J523) • Harness check Bridge unit gate solenoid • Solenoid check (Perform the output check: 03- 232) • Connector check (CN334, J523) • Harness check LGC board • Board check • Connector check (CN334) • Harness check Bridge unit • Does the transport roller of the bridge unit work when the fuser motor is rotated? (Perform the output check: 03-113/163) • Check the drive system of the equipment and bridge unit. • Check if the rollers in the exit roller, the pressure spring and the bridge unit are worn out.

← Xem tất cả mã lỗi Toshiba e-Studio 2820c

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie